CONSTRUCTION FIRE DOORS

Stone Foundation of the Fire Safety
Saajos is one of the most remarkable fire and safety door producers in the field of construction industry around the Baltic Sea. Typical targets are hotels, shopping centres, hospitals, industrial plants and public buildings. Our target is to offer only top quality engineering and products.

Hidden

Stone Foundation of the Fire Safety

Saajos Oy is one of the most remarkable fire and safety door producers in the field of construction industry around the Baltic Sea. Typical targets are hotels, shopping centres, hospitals, industrial plants and public buildings. Our target is to offer only top quality engineering and products.

HINGED FIRE DOORS

Most common type of fire door. Used in passageways of buildings between the fire compartments. Saajos Fire Doors are made of non-combustible materials that prevent fire spreading for certain time. Features are indicated according to the classification standard SFS-EN 13501-2:

  • Capability to prevent fire and flame spread are tested acc. to fire test standard SFS-EN 1634-1
  • Mechanical strength is tested acc. to SFS-EN 14600

Size limitation in fire classified doors

FIRE RATING MINIMUM MAXIMUM
EI2120 (double door) 13,1 x 17,28M width 29,87M and height 26,44M, however, surface area max. 7,1 m2
EI2120 (single leaf) 6,1 x 17,28M width 12M and height 23M
EI260 (double door) 10,1 x 5,5M width 22,9M and height 25,2M, however, surface area max. 5,2 m2
EI260 (single leaf) 5 x 5,3M width 12M and height 23M, however, surface area max. 2,45 m2
EI230 (double door) 12,6 x 18M width 28,6M and height 27,5M, however, surface area max. 7,1 m2
EI230 (single leaf) 6,5 x 18M width 13M and height 24M

Equipment

  • door leafs are made of zinc-coated steel plates
  • screw-fastening frame with cover lists, made of zinc-coated steel plates
  • lift hinges of steel
  • fitting for Abloy 4190T lock
  • reinforcements for pull and closer
  • cover caps for fastening holes
  • quick latch installed (double doors only)
  • instructions for installation, handling, maintenance and painting

Accessories

  • kick plates
  • alternative quick latch (double doors)
  • different door closer types
  • window, max 460 x 560 mm
  • fitting and tubing for electric lock, door magnet, wires and lead cover, locations and models acc. to type approvals
  • fitting for security lock
  • type approved frame with gasket, U-value < 1,0 W/m2K
  • alternative surface handling and powder painting, standard shades

Other accessories and iron mongery according to tender.

SLIDING FIRE DOORS

Sliding fire door is needed when the construction opening is large. The door is installed on the wall on top of the opening where it moves along the wall on a rail. Features below are indicated according to the classification standard SFS-EN 13501-2: :

  • Capability to prevent fire and flame spread are tested acc. to fire test standard SFS-EN 1634-1

Minimum size for fire classified door leaf (width x height): 1500 mm x 2213 mm
Maximum size for fire classified door leaf (width x height): 6000 mm x 5162 mm
E 120-class door doesn’t require safety distance

Equipment

  • door leaf is made of zinc-coated steel plates
  • electro-galvanized slide rail with fasteners
  • electro-galvanized rollers with bearings
  • fire emergency closing equipment:
  • PSL manual emergency closer for max. 600 kg normally open doors
  • E6LDC fire emergency closer for automatically functioning doors
  • E6LDC fire emergency closer with force controlled buttons
  • smoke and/or heat detector
  • cup or bar puller
  • lower guide and door stopper
  • protective painting on non-galvanized steel parts
  • installation and maintenance instrutions

Accessories

  • cut-outs for monitoring equipment
  • kick plates
  • crush barrier
  • painting
FIRE HATCHES

Fire hatches are tested and classified according to the requirements for hinged fire doors. Features are indicated according to the classification standard SFS-EN 13501-2:

  • Capability to prevent fire and flame spread are tested acc. to fire test standard SFS-EN 1634-1
  • Mechanical strength is tested acc. to SFS-EN 14600

EI260: construction opening max. 1150 mm wide and 2400 mm high.

Equipment

  • door leafs are made of zinc-coated steel plates
  • screw-fastening frame with cover lists, made of zinc-coated steel plates
  • lift hinges of steel
  • fitting for Abloy 4190T lock
  • reinforcements for pull and closer
  • cover caps for fastening holes
  • threshold same profile as the other parts of the frame
  • instructions for installation, handling, maintenance and

Accessories

  • kick plates
  • different door closer types
  • fitting and tubing for electric lock, door magnet, wires and lead cover, locations and models acc. to type approvals
  • alternative surface handling and powder painting, standard shades
PRESSURE:PROOF FIRE DOORS

Pressure-proof fire doors have been designed and tested to withstand the stress of a pressure impact in addition to “standard fire door”. Doors are made of non-combustible materials that prevent fire spreading for certain time. Features are indicated according to the classification standard SFS-EN 13501-2:

  • Capability to prevent fire and flame spread are tested acc. to fire test standard SFS-EN 1634-1
  • Mechanical strength is tested acc. to SFS-EN 14600
  • Pressure impact has been tested at Laboratory of air handling technology at VTT Expert Services, Finland
    • HFO-doors between 0,01 – 0,4 bar
    • HPO-doors with explosive pressure 1,0 bar
  • Flying particles and hurricane test have been performed for HPO door according to standards ASTM E 1886-05 and ASTM 1996-09

HFO = EI260
Minimum size classified: HFO: 5 x 15,75M
Maximum size classified: HFO: width 22,8M and height 25,2M, however, surface area max. 5,2 m2

Equipment

  • door leafs are made of zinc-coated steel plates
  • screw-fastening frame with cover lists, made of zinc-coated steel plates
  • lift hinges of steel
  • 3-point lock
  • reinforcements for pull and closer
  • cover caps for fastening holes
  • quick latch installed (double doors only)
  • instructions for installation, handling, maintenance and painting

Accessories

  • kick plates
  • alternative quick latch (double doors)
  • different door closer types
  • fitting for security lock
  • alternative surface handling and powder painting, standard shades

Other accessories and iron mongery according to tender.

BURGLARY RESISTANT FIRE DOORS

Locations that require burglar resistance in addition to fire safety. Burglary resistance features are expressed according to the classification standard SFS-EN 1627 and fire-proof features according to the classification standard SFS-EN 13501-2:

  • Capability to prevent fire and flame spread are tested acc. to fire test standard SFS-EN 1634-1
  • Mechanical strength is tested acc. to SFS-EN 14600
  • Burglary resistance is tested acc. to SFS-EN 1628, 1629 and 1630, class 3

Size limitations of fire classified doors

Minimum size as classified fire door: 5 x 15,75M
Maximum size as classified fire door: 11,5 x 24,15M

Equipment

  • door leafs are made of zinc-coated steel plates
  • screw-fastening frame with cover lists, made of zinc-coated steel plates
  • lift hinges of hardened steel
  • lock cases acc. to SFS-ENV 1627
  • reinforcements for pull and closer
  • safety pins
  • instructions for installation, handling, maintenance and painting

Accessories

  • kick plates
  • different door closer types
  • fitting and tubing for electric lock, door magnet, wires and lead cover, locations and models acc. to type approvals
  • alternative surface handling and powder painting, standard shades

Other accessories and iron mongery according to tender.

ACOUSTIC FIRE DOORS

Locations that require airbourne sound insulation in addition to fire safety. Acoustic features are expressed according to the classification standard ISO 717-1 and fire-proof features according to the classification standard SFS-EN 13501-2:

  • Capability to prevent fire and flame spread are tested acc. to fire test standard SFS-EN 1634-1
  • Mechanical strength is tested acc. to SFS-EN 14600
  • Airbourne sound insulation is tested acc. to ISO 140-3, RW = 34 dB

Size limitations of fire classified doors

Minimum size as classified fire door: 5 x 15,75M
Maximum size as classified fire door: 11,5 x 24,15M

Equipment

  • door leafs are made of zinc-coated steel plates
  • screw-fastening frame with cover lists, made of zinc-coated steel plates
  • lift hinges of steel
  • fitting for Abloy 4190T lock
  • reinforcements for pull and closer
  • cover caps for fastening holes
  • instructions for installation, handling, maintenance and painting

Accessories

  • kick plates
  • different door closer types
  • window, max 460 x 560 mm
  • fitting and tubing for electric lock, door magnet, wires and lead cover, locations and models acc. to type approvals
  • fitting for security lock
  • alternative surface handling and powder painting, standard shades

Other accessories and iron mongery according to tender.

GLAZED FIRE DOORS

Profile construction fire door. Used in passageways of buildings between the fire compartments. Glazed Fire Doors are made of non-combustible materials that prevent fire spreading for certain time. Features are indicated according to the classification standard SFS-EN 13501-2:

  • Capability to prevent fire and flame spread are tested acc. to fire test standard SFS-EN 1634-1
  • Mechanical strength is tested acc. to SFS-EN 14600

Size limitation in fire classified doors according to the type approvals.

Equipment

  • frame and door parts are made of steel profiles
  • glazed with glasses in accordance to the type approval
  • welded steel lift-hinges with bearings
  • Fitting for Abloy profile lock
  • reinforcements for pull and closer
  • quick latch installed (double doors only)
  • instructions for installation, handling, maintenance and painting

Accessories

  • kick plates
  • alternative quick latch (double doors)
  • different door closer types
  • fitting and tubing for electric lock, door magnet, wires and lead cover, locations and models acc. to type approvals
  • fitting for security lock
  • alternative surface handling and powder painting, standard shades

Other accessories and iron mongery according to tender.

BULLET-PROOF FIRE DOORS
Test standard DIN 52 290.

MODULE OPENING IN WALL OUTER DIMENSION OF FRAME D X F B X H CLEAR OPENING Y X Z
9 x 21 M 900 x 2100 960 x 2130 840 x 2065 800 x 2045
10 x 21 M 1000 x 2100 1060 x 2130 940 x 2065 900 x 2045
MODULE WEIGHT (DOOR + FRAME) AND TYPE CODE
310.1 309.3 308.1 K308/415A
9 x 21 M 130 kg 140 kg 200 kg 215 kg
10 x 21 M 140 kg 150 kg 220 kg 235 kg

Equipment

  • Door leaves made of zinc-coated steel plate, not painted
  • Screw-fastening frame with cover lists, made of electro-galvanised steel
  • Hardened lift-up steel hinges with greas nipples
  • Fitting for Abloy 4190T -lock
  • Reinforcements for door closer and puller
  • Mounting and painting instructions

Accessories

  • Kick plates
  • Different types of door closers
  • Different types of latches for double doors
  • Fitting for security lock
  • Different types of handles, pullers etc. mounted
  • Fitting for electric lock, monitoring equipment and lead cover
  • Different types of surface finishing

Other accessories and iron mongery according to tender.

MARINE FIRE DOORS

Our products travel thousands of nautical miles with the luxury cruisers, passenger ferries and cargo ships every day, ensuring the utmost safety of the passengers and crew members.

INDUSTRIAL SPECIALITIES

In the most demanding industrial environments the products may be subject to special requirements like pressure or burglary resistance in addition to fire safety. We can find the perfect solution for every client no matter how small or big they are.

Saajos AS
Paldiski mnt 31
EE-76606 Keila
ESTONIA

Saajos Oy
Puistokatu 21
FI-08150 Lohja
FINLAND